Acratex® Roof Primer Surfacer is a Light Grey high build, pigmented, waterbased, 100% acrylic coating. It is designed to be applied to suitably prepared aged and pitted concrete roofs in need of restoration. It has been especially formulated to make it suitable for the collection of drinking water. Acratex® Roof Primer Surfacer is designed to be applied as part of the approved Roof Membrane System for tile restoration.
Re-coat
4 hours
Cleaning materials
Water
Application Tools
Airspray, Airless spray, Brush, Roller
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and Acratex® Substrate Guide.
Airless spray
Note: This material is a penetrating sealer, and as such wet film thickness may vary according to surface porosity. Approximate coverage rates of 8- 10 square metres per litre is generally required to adequately seal and consolidate the substrate. As the surface area of a "profiled roof" is greater than equivalent flat roof surface, additional material should be allowed for. Product should be thoroughly mixed before use.
Refer to the Dulux Acratex Application Manual for detailed application instructions.
Apply one coat by airless spray of Dulux Acratex Roof Sealer SB at a minimum coverage rate of 10 square metres per litre and allow to dry minimum 4 hours before top coating.
For further details refer to the current version of:
Dulux Acratex Roof Membrane Application Data Sheet
Dulux Acratex Roof Membrane Specification
