Acratex® Coventry® Medium is a full acrylic system designed to deliver a decorative traditional texture finish. In-built with premium water-based technology, the range has proven performance against Australian weather conditions. This low-build coating can be tinted to a wide range of colours. Acratex® Coventry® Medium sits between Coarse and Fine, completing the Coventry family of premium decorative texture finishes.
Re-coat
24 Hours
Cleaning materials
Water
Application Tools
Trowel, Hopper Gun, Hawk
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and Acratex® Substrate Guide.
Trowel and Hawk finished with a plastic float
Product should be tinted & thoroughly mixed before use.
Refer to the Dulux Acratex Application Manual for detailed application instructions.
Use masking to protect adjacent areas. The area should be patched and primed ready for final texture coat.
Dulux Acratex Coventry Medium is applied by hawk and stainless steel trowel, then finished in a circular motion with the plastic finishing float to achieve an even granular appearance.
Two applicators are required for most areas - one applying the other processing the finish. Delivery must be to a uniform thickness. Allow the material to stand for a short time before "rubbing up" with float to produce the desired pattern/texture. Application must be in a brisk uniform fashion terminating when the whole area is complete, banded by a natural break such as an expansion joint, corner etc. Application commenced on a single area must be completed uninterrupted.
