Acratex® AcraShield® MIOX brings a deeply-toned and textured metallic shine to any facade. Using a micaceous iron oxide (MIOX) base, it achieves a rich matte finish with a metallic spark. AcraShield® MIOX has with excellent durability particularly as the pigment interlocks in the film to reduce moisture permeability and improve resistance to degradation by UV light. AcraShield® MIOX is available in a range of dark tone colours with a glimmer effect and is recommended on suitably primed and levelled substrate not subject to high physical abrasion.
Re-coat
2 hours
Cleaning materials
Water
Application Tools
Brush, Roller, HVLP
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and Acratex® Substrate Guide.
Brush, roller ( Not suitable for airless spray application)
Brush and roll at the same time to avoid picture framing.
Product should be thoroughly mixed before use. Refer to the Dulux Acratex Application Manual for detailed instructions.
Dulux Acratex Acrashield Advance may be applied by brush, roller or airless spray.
A 10 mm nap roller is used depending on the type of texture being over coated.
Lay-Off in one direction, Lay-off frequently.
For best Results apply by Airless Spray Typical set up is: Graco Ultra 500 using 0.019-0.021 spray tip at approx. 1000 psi.
