Dulux Avista Slip Reducing Crushed Glass is a clear glass additive that can be applied via hand broadcast to increase the slip resistance of Dulux Avista sealers & epoxies.
High levels of slip reducing crushed glass may detract from the appearance, and lower gloss levels.
High levels of slip reducing crushed glass can make cleaning more difficult.
Slip resistance achieved will vary depending on finish of the concrete, amount of crushed glass additive used & evenness of application.
Check TDS of relevant Dulux Avista product for recommended surface preparation.
Apply a coat of Dulux Avista sealer or epoxy over an area of about 2-5m². While surface is still wet, broadcast by hand sufficient Anti Slip in an upward motion to supply the slip resistance needed. It is important to apply crushed glass evenly, or the physical appearance can be altered slightly. When all of the designated surface is covered with crushed glass, allow the surface to dry. Apply a final coat of sealer or epoxy over the whole area to seal the crushed glass in place.
Note: For systems with more than 2 coats of sealer or epoxy, the crushed glass should be applied between the final 2 coats.
