Dulux Avista Waterbased Colour Tint is designed for tinting Dulux Avista waterbased products including Dulux Avista Resurfacing Base Compound, Waterbased Flooring Epoxy and Waterbased Concrete Sealer. It cannot be used with solvent based systems.
Cleaning materials
Water
Application Tools
For use in Dulux Avista Waterbased Epoxy
Mix desired amount of Waterbased Epoxy, as per mixing instructions on the TDS. once mixed, add Dulux Avista Waterbased Colour Tint at a minimum ratio of upto 80ml per litre of mixed epoxy.
Note: For a darker or more vibrant colour, the tint ratio can be doubled to 80ml per litre of epoxy (2 x 400ml cans per 10L kit). This is highly recommended when using black.
For use in Dulux Avista Concrete Resurfacing Base Compound
Add required amount of clean potable water (3.2L - 3.6L) in a clean 20L bucket. Slowly add the 400ml Waterbased Colour tint, mixing at low speed until water colour is uniform. The total amount of liquid used should now total 3.6L to 4.0L (3.2L - 3.6 L of water + 400ml tint). Slowly add Resurfacing Base Compound, mixing continuously.
Once full content has been added, mix for a further 3 minutes. This step is critical in activating the polymers to achieve an even consistent mixture.
Important Note: The total amount of liquid used per 20KG resurfacing base compound bag should not exceed 4 Litres. Using too much liquid can create a wet mix that can be difficult to use & will have reduced strength.
