Dulux Concrete & Paving Crushed Pebble Effect is the final stage in transforming your surface. This finishing coat transforms concrete with a decorative effect that is easy to keep clean and withstands high traffic areas for a durable, lasting finish*. *MUST USE CRUSHED PEBBLE EFFECT ROLLER TO APPLY CRUSHED PEBBLE EFFECT TOPCOAT.
Re-coat
3-4 hours between coats
Cleaning materials
Water
Application Tools
Brush, Roller
• Use the Preparation table above to determine which cleaner/s and primer/s will be required.
• Stir Dulux Concrete & Paving Crushed Pebble Effect well before and during application with a broad, flat paddle using an up and down scooping action.
• Use a brush to apply to any edges and hard-to-reach places.
• Use the Dulux Concrete & Paving Crushed Pebble Effect roller to apply an even 1st coat of Dulux Concrete & Paving Crushed Pebble Effect.
• Apply from a roller tray or pour directly from the container.
• Work in areas of approximately 1m x 1m. Allow to dry for 4 hours between coats, then repeat steps 2 & 3.
• For optimal results, 4-6 coats may be required to hide previous surface imperfections or cover over contrasting colours.
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit painttakeback.co.nz or paintback.com.au.
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
