Key Points
- Can be used to create a terrazzo effect
- Suitable for garage floors, rumpus rooms and commercial applications
- Use with Dulux Avista Epoxy Flooring products
- Coverage approximately 15m² per box
Decorative Flakes Grey Timberwolf
The Dulux Avista decorative flake flooring system can be used for garages, kitchens, laundries and rumpus rooms. It can also be used for commercial applications such as shops, foyers, offices and schools. Use with Dulux Avista Epoxy Flooring products for a decorative flake floor. Can be used to create a terrazzo effect.
Keep out of reach of children. Avoid contact with skin and eyes or breathing dust. Wear waterproof gloves and safety glasses. Use only in well ventilated areas. Wash hands after use. Image is not representative of flake colour contained in this carton. Flake colour will change once sealer has been applied. Refer to samples for more accurate representation.
Shelf Life: Unlimited if stored as directed. It is recommended that the base coat colour be the same or similar to one of the flake colours.
1. Apply Dulux Avista Epoxy flooring base coat as per instructions on the label. It is recommended that the base coat colour be the same or similar to one of the flake colours.
2. Remove flakes from box and place in a suitable dry bucket.
3. Evenly sprinkle the flakes whilst the surface is still tacky to achieve a full even cover. To create a partial flake or terrazzo look, the best method is to have very little flake in hand and throw it up high so it falls evenly (less is best and more flakes can always be added). Allow to dry completely.
4. Remove excess flakes by sweeping the surface. If a full flake is applied, give a light sand or scrape of any excess flakes and vacuum thoroughly.
5. Apply 2–3 coats of Dulux Avista Polyurethane or 2 Pack Urethane Sealer as per the label instructions.
Slippery when spilt; clean up immediately. Refer to Local Authority for disposal advice. Do not empty into drains and waterways.
Do not reuse container.