Dulux Avista
Stone Look Flakes Black Slate
Dulux Avista
Stone Look Flakes Black Slate
Stone Look Flakes Black Slate
The Dulux Avista Natural Stone flake flooring system can be used for garages, kitchens, laundries and rumpus rooms. It can also be used for commercial applications such as shops, foyers, offices and schools. Use with Dulux Avista Flooring finishes for a natural stone look.
Keep out of reach of children. Avoid contact with skin and eyes or breathing dust. Wear waterproof gloves and safety glasses. Use only in well ventilated areas. Wash hands after use. Image is not representative of flake colour contained in this carton. Flake colour will change once sealer has been applied. Refer to samples for more accurate representation.
It is recommended that the base coat colour be the same or similar to one of the flake colours. In the make up of the stone flake finish there are very fine flake particles to enable the floor to be completely filled in after the larger particles have been placed. It is best if the larger flakes are distributed first to ensure even distribution before filling in the gaps with the fine flake particles.
1. Apply Dulux Avista Waterbased Epoxy flooring base coat as per instructions on the label. It is recommended that the base coat colour be the same or similar to one of the flake colours.
2. Remove flakes from box and place in a suitable dry bucket.
3. Evenly sprinkle the flakes from an open flat palm with fingers spread. Move hand back and forth allowing the flakes to fall evenly while the surface is still tacky. Allow to dry completely. Note: in the make up of the stone flake finish there are very fine flake particles to enable the floor to be completely filled in after the larger particles have been placed. It is best if the larger flakes are distributed first to ensure even distribution before filling in the gaps with the fine flake particles.
4. Remove excess flakes by sweeping the surface and then do a light sand. Vacuum thoroughly.
5. Apply 2 to 3 coats of Dulux Avista Polyurethane or 2 Pack Urethane Sealer as per the label instructions.
Slippery when spilt; clean up immediately. Refer to Local Authority for disposal advice. Do not empty into drains and waterways.
Do not reuse container.