The surface must be clean and dry, free from grease, rust and dirt. Protect adjoining surfaces from overspray. If undercoating is necessary use Dulux Duramax® Undercoat. Prime all bare steel and iron with Dulux Duramax® Metal Primer. Prime all plastic with Dulux Duramax® Plastic Primer.

Before spraying: Shake can for at least three minutes after first rattle and regularly during use. Lower temperatures and high humidity will slow the drying and affect the gloss level. Avoid spraying when air or surface temperature is below 10°C or above 30°C.

Spray application: Hold can upright 10 to 25cm from the surface. To ensure surface compatibility, test spray on an inconspicuous area. Spray with smooth, even strokes parallel to the surface. This product is formulated to resist running and sagging. It should be applied in one or more light coats, as opposed to one heavy coat.

After spraying: Prevent blocking by turning the can upside down and spraying until clear gas emerges. Also wipe front of nozzle clean. Clean up overspray while it is still wet with mineral turpentine.