Dulux Duramax® Marble Finish must be used over the top of Dulux Duramax® Decorative colours to deliver the marble finish. The pre-painted Duramax® surface must be clean and dry, free from grease, rust and dirt. Protect adjoining surfaces from overspray.

Before spraying: Shake can for at least three minutes before use and regularly during use. Lower temperatures and high humidity will slow the drying and affect the gloss level. Avoid spraying when air or surface temperature is below 10°C or above 30°C.

Spray application: Hold can upright 15 to 25cm from the surface. Test spray on a piece of cardboard to determine desired effect. Spray with fast, even strokes parallel to the surface. Only one coat is required. Protect the coating by applying Dulux Duramax® Gloss Clear Coat over the top after 24 hours.

After spraying: Prevent blocking by turning the can upside down and spraying until clear gas emerges. Also wipe front of nozzle clean. Clean up overspray while it is still wet with mineral turpentine.