Dulux Spray
Black Flat
Dulux Spray
Black Flat
About Dulux Spray Black Flat
Dulux Spray with Duramax Technology™ delivers superior durability and fast dry times for interior and exterior use. Self priming on most surfaces and a drip free formulation ensures projects can be completed quickly without compromise on finish.
Key Points
- Touch dry in 10 minutes
- Interior & exterior durability
- Superior coverage: up to 4.5m2
- Dries 10x fast than alkyd-based spray paint
- Self priming on most surfaces: ideal for wood, metal and most plastics
- Soft touch spray tip
Quick guide
Touch Dry
10 minutes
Re-coat
10 minutes
Cleaning materials
Mineral turpentine
Application Tools
Aerosol spray
Product specification
Surfaces
- Porous and previously painted surfaces
- Most plastics (uPVC and ABS)
- Wood
- Most metals (non-ferrous)
Precautions and limitations
Note: Some plastics like polyethylene do not allow for paint adhesion even with primers. Test the plastic projects in an inconspicuous area first
Surface preparation
Previously painted surface
The surface must be clean and dry, free from grease, rust and dirt. Protect adjoining surfaces from overspray.
For wood, most metals (non-ferrous), porous and previously painted surfaces, and most plastics (uPVC and ABS) lightly sand the surface, no primer is required.
For other plastics we recommend using Dulux Spray Plastic Primer to prime your plastic.
For tiles, glass, enamels and laminate we recommend priming the surface with Dulux Spray Multi-Surface Primer.
How to apply
Airless/Conventional Spray
1. BEFORE SPRAYING
Shake can for at least two minutes after first rattle and regularly during use. Lower temperatures and high humidity will slow the drying and affect the gloss level. Do not spray when air or surface temperature is below 10°C or above 30°C.
2. SPRAY APPLICATION
Hold can upright 20 to 25cm from the surface. To ensure surface compatibility, test spray on an inconspicuous area. Spray with smooth, even strokes parallel to the surface. This product is formulated to resist running and sagging. It should be applied in several light coats, as opposed to one heavy coat.
Re-coating: Any time after 10 minutes.
Drying: Touch dry in less than 10 minutes, ready to use in 1 hour.
3. AFTER SPRAYING
Prevent blocking by turning the can upside down and spraying until clear gas emerges. Also wipe front of nozzle clean. Clean up overspray while it is still wet with mineral turps.
How to dispose responsibly
Unused paint
Spray unwanted paint onto newspaper, allow to dry and dispose of remaining contents/container in accordance with local, regional, national and international regulations. If can becomes rusted or damaged dispose of carefully - obtain instructions from our website or 24hr Emergency Response Number.