Dulux
Ceiling White Flat
Dulux
Ceiling White Flat
About Dulux Ceiling White Flat
Dulux Ceiling White offers smooth application and a flat finish, making it easier than ever to transform all interior ceilings. With its exceptional coverage and superior hiding power, it effortlessly conceals surface imperfections. Equipped with a 5-year guarantee against mould growth, Dulux Ceiling White is specially formulated to achieve a long-lasting, quality result.
Key Points
- Very easy to apply
- Ideal for lighting on all ceilings - high and low
- Very low VOC
- 2-hour recoat
- Superior hiding power
- Very low splatter formula
- Easy clean-up
- Flat finish to hide surface imperfections
- 5-year guarantee against mould growth*
- Formulated for the smoothest finish
Quick guide
Touch Dry
20 minutes
Re-coat
2 hours
Cleaning materials
Water
Application Tools
Brush, Roller, Spray
Product specification
Surfaces
- Previously painted surfaces
- Plasterboard
- Brick
- Cement Sheeting
- Bare Timber
- Set Plaster And Fibrous Plaster.
Precautions and limitations
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not exceed recommended spreading rate. Avoid exposure to steam and condensation for 48 hours after application. Although the film is dry to touch in 20 minutes, allow 7 days for the film to fully cure before lightly cleaning with a sponge wet with mild detergent solution. Do not paint at temperatures below 10 degrees Celsius or when the temperature of surface may fall below 10 degrees Celsius during the drying period.
Performance guide
- Weather: Not suitable for exterior application.
- Heat Resistance: Up to 60°C.
- Solvent: Poor solvent resistance, sensitive to aromatic hydrocarbons and alcohols.
- Water: For interior use in damp and dry areas.
Surface preparation
Previously painted surface
Dust, then clean with Selleys Sugar Soap. If the surface is glossy, lightly sand back to a dull finish. Spot prime repairs with Dulux 1 Step Acrylic Primer Sealer Undercoat and then apply a full coat over the entire surface.
Unpainted surfaces
Unpainted Plasterboard
Apply a coat of Dulux 1 Step Acrylic Sealer Undercoat over the entire surface.
How to apply
Brush, Roller
Stir well before use with a broad flat paddle using an up and down scooping action. Apply two coats of Dulux Ceiling White ensuring that the first coat is completely dry before applying the second. Remember, using poor quality or worn rollers can effect the final finish achieved. Note: some colours may require more than two coats, especially when painting over dark colours.
How to dispose responsibly
Unused paint
Unused paint: Do not pour leftover paint down the drain. Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections. Empty paint containers: Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs. Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first. Do not reuse container unless thoroughly decontaminated. For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
