Berger Premium Water Based Enamel Gloss is suitable for use on all interior and exterior doors, windows, skirting boards and cupboards. It dries to a hard, durable finish.
Touch Dry
20 Minutes
Cleaning materials
Water
Application Tools
Air Spray, Brush, Roller
All preparation and painting must conform to AS 2311: The painting of buildings.
Do not paint at temperatures below 10C or when the surface temperature may fall below 10C during the drying period. Avoid exposure to steam and condensation for 48 hours after application. Although film is dry to touch after 30 minutes allow 7 days for film to cure before cleaning with a cloth, or soft brush with detergent solution.
All surfaces must be thoroughly cleaned and free of loose dirt, dust, grease, loose or flaking paint and loose surface plaster. Efflorescence or mould on masonry or concrete surfaces must be treated. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth, then apply primer, sealer or undercoat as required
Brush roll or HVLP spray
Stir contents thoroughly before and during use with a broad flat stirrer using an upward lifting action.
Brush/Roll
Apply evenly, ensuring to keep a wet edge whilst painting. Lay off with light vertical strokes. On wall areas use a 5-9mm nap roller to achieve the smoothest finish.
Spray
Application by HVLP spray suitable if thinned with 5% water.
