Berger Door & Trim Water Based creates a beautiful and hard wearing semi gloss finish ideal for doors, windows, and trim in your home. Berger Doors & Trim Water Based is non yellowing for better colour retention, and is flexible to movements in timber. Use Berger Doors & Trim in high traffic areas of your home.
Touch Dry
20 mins
Cleaning materials
Water
Application Tools
Air Spray, Airless Spray, Brush, Roller
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not apply if the surface temperature is below 10C or conditions indicate it will fall below 10C during the drying period. All enamels yellow with age. This can be accelerated by darkness, heat and exposure to ammonia from freshly painted acrylic paints and some cleaning agents, particularly during the drying period.
All surfaces must be thoroughly cleaned and free of loose dirt, dust, grease, loose or flaking paint and loose surface plaster. Efflorescence or mould on masonry or concrete surfaces must be treated. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth, then apply primer, sealer or undercoat as required.
Brush, roll, or spray.
Stir contents thoroughly before and during use with a broad flat stirrer using an upward lifting action.
Brush/Roll:
Apply evenly, ensuring to keep a wet edge whilst painting. Lay off with light vertical strokes. On wall areas use a 5-9mm nap roller to achieve the smoothest finish. Spray: Application by HVLP spray suitable if thinned with 5% water
