Safeguard the appearance of your home with Dulux PRECISION® Anti Graffiti, a heavy duty coating that can provide long-term protection to a range of bare and painted surfaces. Only high-pressure water is required to easily remove aerosol paint-based graffiti from surfaces protected with PRECISION® Anti Graffiti enabling you save on costs associated with repainting or removing graffiti.
Touch Dry
1 hour
Re-coat
1 hour
Cleaning materials
Mineral turpentine. Dispose of roller and brushes after application.
Application Tools
Brush, Roller, Spray
All preparation and painting must conform to AS/NZS 2311:2017 "Guide to the painting of Buildings". NB: This Standard provides a guide to products and procedures for the painting of buildings for general domestic, commercial and industrial use.
Do not apply to moist or damp surfaces
Do not apply to soiled or dirty surfaces
Do not apply to horizontal surfaces
Do not use over surfaces or paints with low UV resistance
Do not apply to pathways
Dulux Precision AntiGraffiti Coating will not provide any UV resistance or protection to any underlying surface or paint. Hence the surface layer of the underlying paint, or the substrate, will still degrade, and the system will fail at this degraded boundary layer between the substrate/paint and the Dulux Precision Anti Graffiti Coating.
Warning: Dulux Precision Anti Graffiti Coating is a permanent coating on bare/unpainted and porous surfaces.
If you wish to remove coating at a later date, you will need to apply a paint layer first.
Dulux Precision Anti Graffiti Coating creates a "wet look" on uncoated surfaces. For advice on how to reduce this effect, contact Dulux Customer Service.
Dulux Precision Anti Graffiti Coating provides a clear gloss finish to any surface that it is applied.
Dulux Precision Anti Graffiti Coating is not suitable for surfaces such as plastic, Colorbond® or Colorsteel® roller doors or motor vehicles or other mobile equipment.
It is not recommended for floors or horizontal surfaces.
Dulux Precision Anti Graffiti Coating is designed so that overcoating paint does not stick, therefore it can not be permanently coated with any other paint system.
However, Dulux Precision Anti Graffiti Coating has excellent overcoat adhesion to itself.This feature allows an existing application of Dulux Precision Anti Graffiti Coating that has been damaged to be repaired.
Dulux Precision Anti Graffiti Coating cures to a relatively soft and rubbery finish. Avoid abrasion to the surface, such as sanding, scratching or scuffing. Avoid use in applications where the product may be subjected to even intermittent abrasion.
Dulux Precision Anti Graffiti Coating is suitable for Interior and exterior use directly onto a variety of bare and painted surfaces including; timber, concrete, brick, render, mineral silicate paint, stone paint.
On metal, glass, vitreous glazed tiles, anodised and coated aluminium, Colorbond® or Colorsteel®, painted uPVC and powder coat substrates it is important to first prime with Dulux Precision Anti Graffiti Wash Primer.
See separate Data Sheet for advice on Dulux Precision Anti Graffiti Wash Primer.
Good Condition – Dust, then clean with Selleys® Sugar Soap and rinse thoroughly. Dry completely before applying Dulux Precision Anti-Graffiti Coating
Cracked or peeling – Remove paint completely. Wash down with Selleys® Sugar Soap and rinse thoroughly. Dry completely before applying Dulux Precision Anti-Graffiti Coating
Gloss surface – Apply 1 coat of Dulux Precision Anti Graffiti Wash Primer. Wait for a minimum of 30 minutes then apply Dulux Precision Anti-Graffiti Coating
Warning: this is a permanent coating on bare/unpainted surfaces. If you wish to remove coating at a later date, you will need to apply a paint layer first.
This coating creates a wet look on uncoated surfaces. For advice on how to reduce this effect, contact Dulux Customer Service.
The surface must be free from contaminants including grease, oil, dirt and other loosely adhering materials.
Brick, concrete, cement, render – Fill holes and other imperfections with a suitable filler, sand and dust off. Allow cement render and concrete to properly cure before painting. General practice is to leave concrete surfaces for 28 days before applying any coatings.
Timber – Sand bare timber to a clean surface and dust down. Fill nail holes and cracks with suitable filler, then sand smooth and dust off. Metal, Glass, Vitreous Glazed Tiles, Powder Coat, anodised or coated aluminium, Colorbond® or Colorsteel®, – Apply 1 coat of Dulux Precision Anti Graffiti Wash Primer.
Removing Graffiti
Use a high pressure water wash (900–1450psi) to remove aerosol paints. Using a fan spray only from a distance of 150–300mm. A distance of less than 150mm from the surface may cause abrasion and may compromise the coating. Stubborn stains that remain after washing, such as permanent markers, can be removed with Selleys® Muck Off and high pressure water wash.
Overcoating
Dulux Precision Anti Graffiti – Wash down surface with high pressure water. Allow surface to completely dry. Apply 1 coat of Dulux Precision Anti Graffiti.
All Other Paints – Completely remove Dulux Precision Anti Graffiti Coating. Contact Dulux Customer Service for advice.
Decant the appropriate amount into a dry clean container. Immediately reseal screw cap to prevent exposure to air, which will cause paint to cure.
Product must be used within 1 hour of pouring into container.
Cut-in around the edges with a brush, then roll up to the border while it is still wet.
Apply two coats ensuring that the first coat is completely cured before applying the second. When spraying outside, avoid windy days.
The second coat is important to ensure that any micro-voids, and small uncoated areas from the first coat, are properly covered and protected.
Touch up
Damaged areas can be touch up repaired with Dulux Precision Anti Graffiti. Simply clean and dry the damaged area then apply a new coat of Dulux Anti-Graffiti Coating
For more painting advice: dulux.com.au/advice or dulux.co.nz/advice
