Berger Gold Label® Interior Low Sheen Acrylic is a high quality, washable, acrylic low sheen finish with good opacity, adhesion and appearance. It has good wet edge for lapping, minimum roller fly off and has good resistance to staining.
Touch Dry
20 mins
Cleaning materials
Water
Application Tools
Air Spray, Airless Spray, Brush, Roller
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not paint at temperatures below10C or when the temperature may fall below 10C during the drying period. Seven days are required after application to develop maximum hardness and stain removal properties. Most stains can be removed with gentle wiping.
All surfaces must be thoroughly cleaned and free of all loose dirt, dust, grease and loose or flaking paint. Glossy surfaces should be sanded thoroughly to flatten surface and wiped clean with a damp cloth. Apply sealer or undercoat as required.
Brush, roller, conventional and airless spray
Stir contents thoroughly before and during use with a broad, flat stirrer, using an upward lifting motion.
Brush/Roller
Rinse brush or roller in water before starting and use whilst still slightly damp. Apply two full, even coats. Under hot conditions, or on very absorbent surfaces, up to 100ml of clean water per litre may be added to assist application. Avoid excessive brushing or rolling back into paint which has begun to tack off.
Suitable for application by all standard spray equipment. If necessary, thin with up to 100ml of clean water per litre to aid atomisation
