Dulux Professional® SteriGuard® Water Based Enamel is a premium, hard wearing interior/exterior water-based enamel designed to withstand cleaning cycles in clinical environments. The low odour formula ensures quick return to service with less disruption. Dulux Professional® SteriGuard® Water Based Enamel when combined with clinical cleaning programmes, helps assist in the protection against mould and bacteria to keep surfaces clean and help maintain good indoor air quality.
Cleaning materials
Water
Application Tools
Brush, Roller, Spray
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not use at temperatures below 10C, or when the temperature of the surface may fall below 10C during the drying period. Avoid exposure to steam and condensation for 48 hours after application. Although the film is dry to touch in 30 minutes allow 7 days for film to fully cure before washing. Use a non-abrasive cleaning cloth to maintain condition of painted surface.
Tinted Colours
Ensure that the paint is thoroughly shaken and stirred immediately after addition of tinter to the can and again before use.
All surfaces must be thoroughly cleaned and free of all loose dirt, dust, grease, loose or flaking paint, and loose surface plaster. Efflorescence or mould on masonry or concrete surfaces must be treated. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth, then apply primer, sealer or undercoat as required.
