Berger Gold Label
Undercoat Oil Based
Berger Gold Label
Undercoat Oil Based
About Berger Gold Label Undercoat Oil Based
Berger Gold Label® Oil Based Undercoat is an oil based interior/exterior undercoat with excellent filling and sanding properties and good hold-out for gloss and semi gloss enamels.
Key Points
- General purpose
- Good filling & sanding
- Good enamel hold out
- Can be used on a wide range of interior and exterior surfaces
- Both application and sanding down are quick and easy
- Gloss finishes are sharp and satins an even sheen
Quick guide
Touch Dry
6 Hours
Cleaning materials
Thinner
Application Tools
Air Spray, Airless Spray, Brush, Roller
Product specification
Precautions and limitations
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not apply if the surface temperature is below 10C or conditions indicate it will fall below 10C during the drying period.
Do not apply externally when weather is doubtful, or late in afternoon during winter, as frost, rain or dew on the uncured undercoat may result in loss of film integrity and impair durability of the system.
Performance guide
- Weather: Excellent when topcoated.
- Heat Resistance: Up to 120C. Premature yellowing & embrittlement will occur if film is subject to continuous heat.
- Water: Excellent when topcoated.
- Solvent: Resists alcohols and hydrocarbons. Film is liable to attack from other strong solvents.
Surface preparation
Previously painted surface
All surfaces must be thoroughly dry, clean and free of all loose dirt, grease, mould, mildew and wax, surface chalk and loose or flaking paint. Sand smooth, dust down, fill and prime in accordance with the requirements of the chosen system.
How to apply
Brush, Roller
Brush, roller, conventional or airless spray
Stir contents thoroughly before and during use.
Brush/Roller
Apply by brush or roller, full even coats direct from the container. If necessary up to 50ml per litre of mineral turpentine may be added to ease application
Airless/Conventional Spray
Airless/Conventional Spray
Suitable for application by all standard spray equipment. If necessary thin with up to 100ml per litre of mineral turpentine to aid atomisation.