Berger Premium Triple Prep Acrylic is a multi purpose interior / exterior preparation coat that primes, seals and undercoats most interior and exterior substrates.
Touch Dry
30 Minutes
Cleaning materials
Water
Application Tools
Air Spray, Airless Spray, Brush, Roller
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not overspread. In hot weather, rinse brush every half hour or use two and keep one standing in water. Do not apply if temperature is under 10C, or when temperature of surface may fall below 10C during the drying period, otherwise film formation will not be complete and poor properties will result.
All surfaces must be thoroughly clean and free of all loose dirt, surface chalk, grease, mould, mildew and wax, loose or flaking paint and efflorescence.
Glossy surfaces should be sanded to remove gloss. Sand smooth any imperfections and fill with appropriate filler, sand and dust down.
Brush, roller, conventional or airless spray.
Brushes: Wet brushes with water prior to use to avoid clogging. Apply a full even coat direct from the container. Under hot and/or very windy conditions it may be necessary to thin with up to 100ml per litre of clean water.
Roller: Using a medium nap roller apply a full even coat direct from the container and finish by light parallel strokes with a practically dry roller.
Airless/Conventional Spray: Suitable for application by all standard spray equipment. If necessary thin up to 100ml per litre with water to aid atomisation.
Stir contents thoroughly before and during use. Apply direct from can. May be applied to dampened surfaces. If applied over dry, porous surfaces, dampen surface before applying.
