Dulux PRECISION® Advanced Stain & Odour Blocker is ideal for severe stains caused by graffiti, grease, and major water and fire damage. The water-based coating offers the superior stain blocking performance of an oil and shellac-based undercoat with the convenience of low odour, fast-drying and water wash-up.
Touch Dry
30 minutes
Re-coat
1 hour
Cleaning materials
Water
Application Tools
Brush, Roller, Spray
NB: Dulux Precision Stain and Odour Blocker is incompatible with most other primer and top coat systems. Cross contamination may result in irreversible coagulation of mixed products. Make sure that new roller sleeves and brushes are used when applying Dulux Precision Stain and Odour Blocker. If wanting to use the same brushes with any other water based primer or topcoat wash them thoroughly in water to remove all traces of the previous paint. When spraying ensure that all equipment is thoroughly cleaned and given a final clean water flush before and after using Dulux Precision Stain and Odour Blocker.
All preparation and painting must conform to AS/NZS 2311:2009 Guide to the painting of buildings.
NB: This Standard provides a guide to products and procedures for the painting of buildings for general domestic, commercial and industrial use. The Standard does not include a specific recommendation for the long-term protection of iron or steel exposed directly to the atmosphere or to internal climates likely to have aggressive environments which are dealt with in AS/NZS 2312.
Do not apply if the surface temperature is below 10C or conditions indicate it will fall below10C during the drying period.
This product is not suitable to tint. Tinters are incompatible and will result in coagulation of the primer. For stainblocking applications do not thin.
For aggressive stains from Tannin or activated Lignin resulting from alkaline paint removal processes 2 coats may be necessary to stop the stains.
All surfaces should be thoroughly dry, clean and free from loose dirt. surface chalk, grease, mould, mildew, wax and loose or flaking paint.
Sand smooth and dust down, fill and prime in accordance with the requirements of the chosen system.
Do not apply paint if the temperature is below 10°C or likely to fall below 10°C during the drying period.
Brush Roller, conventional spray or airless spray application.
Stir thoroughly before and during use.
For Stain blocking applications do not thin.
This product is not suitable to tint. Tinting will result in coagulation of the primer.
Apply one even coat of Precision Advanced Stain and Odour Blocker. For heavily stained surfaces or timbers treated with alkaline paint removers or for paper-faced plasterboard where there is a different texture between the paper and jointing compound or where extra filling and smoothness is required, apply a second coat of Precision Advanced Stain and Odour Blocker.
For optimal coverage and smoothness, apply with:
Brush: High quality synthetic filament brush (Nylon or Polyester) Apply in full even coating direct from the container.
Roller: Medium nap synthetic roller (9-12mm) on smooth surfaces, or 13 -18mm on semi-rough or porous surfaces. Apply in full even coating direct from the container.
For optimal coverage and smoothness, apply with:
Spray: Do not thin for stain blocking applications. Suitable for application by all standard spray equipment. Clean Brushes and Rollers with water prior to and after use.
