Dulux PRECISION® Sealer Binder is an oil-based prepcoat that seals porous surfaces and binds unpainted powdery surfaces such as bare plaster, cement sheet and brick to provide a sound foundation to apply subsequent paint coats.
Touch Dry
6 hours
Re-coat
24 hours
Cleaning materials
Mineral turpentine
Application Tools
Brush, Roller
All preparation and painting must conform to AS 2311: The Painting of Buildings.
Particular care should be taken to ensure that this product is not applied to concrete, masonry or render that has not fully cured, for the drying/curing time recommended in AS 2311.
Thorough testing should be carried out prior to painting to ensure that the Alkalinity of the surface is suitable for painting and the substrate moisture content is below 12%. Thick powdery films of chalked paint or kalsomine must be washed off and the surface allowed to dry thoroughly before applying this sealer.
Previously Painted Surfaces: Scrape off loose and flaking paint. Remove dirt, grease, kalsomine and chalky paint by washing down with sugar soap in warm water. Fill nail holes, cracks, etc. with a suitable filler, sand smooth and dust down.
New Interior Set Plaster & Masonry: Allow new masonry and plaster surfaces to dry & cure for at least 12 weeks after erection. Fill imperfections with a suitable filler, sand smooth and dust down.
General: Stir contents thoroughly before and during use with a broad, flat stirrer using an upward lifting action.
Thinning: Not normally required. Under hot conditions or on very porous surfaces application may be eased by thinning with up to 100 ml per litre of mineral turpentine.
Brush/Roller Application: Surfaces of varying texture and porosity use a short nap roller to achieve the most uniform appearance.
Spray Application: Thinning not normally required. Under hot conditions or on porous surfaces, application or penetration may be eased by thinning with up to 100ml of mineral turpentine per litre.
