Important customer information: Update to Temporary fuel surcharge.
Find out more.
Hamburger Icon WhiteHamburger Icon
Dulux TradeDulux Trade
Login/Signup
Dulux Trade
  • About Dulux
    Dulux My Home
    Dulux Specifier
    Privacy Policy
    Terms & Conditions
    Careers
  • Customer service
    Contact Us
    Shipping & Returns
    Find a Store
    Sustainability
    Media
    Dulux Group Corporate
  • Dulux in the Community
    Surf Life Saving Club project
About Dulux
Dulux My Home
Dulux Specifier
Privacy Policy
Terms & Conditions
Careers
Customer Service
Contact Us
Find a Store
Sustainability
Dulux Group Corporate
  • © 2026 Dulux

  • Careers
  • Recommended Sites
  • Shipping & Returns
  • Terms & Conditions
  • Privacy Policy
  • Conditions of Sale
Build: 1.2.37 - Thu, 02 Jul 2026 03:42:07 GMT

Metalshield

Hammered Finish Spray Pack Blue

SALE OFF

No image preview available

SALE OFF

Metalshield

Hammered Finish Spray Pack Blue

Loader

About Metalshield Hammered Finish Spray Pack Blue

Dulux Metalshield Hammered Finish is a durable, protective finish that can be applied to a wide range of metal and pre-painted surfaces including steel, wrought iron, galvanised iron, Zincalume, stainless steel, aluminium, brass, copper and timber. The hammered-effect finish is ideal for hiding surface imperfections such as scratches and weld joints. Use it on machinery, trailers, fences, railings, gates, windows, downpipes, doors and furniture. Available in four colours: Blue, Bronze, Charcoal and Silver

Key Points
  • Durable protective finish
  • Available in 300g
  • Available in four colours: Blue, Bronze, Charcoal and Silver
  • Suits wide range of metal surfaces
Surface preparation
Previously painted surface

Aged/Lightly rusted metal surfaces:
Remove any rust by scraping, sanding or wire brushing. Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt.

New Bare Steel and Wrought Iron
Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt.

Galvanised Iron, Zincalume
Clean surface with Selleys® Sugar Soap and a Scotch-Brite® Pad to remove any grease, oils and dirt. Rinse with clean water.

Aluminium, Copper, Brass, Stainless Steel
Clean surface with Selleys Sugar Soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water

How to apply
Brush, Roller

APPLICATION
Before Spraying: Shake can well for at least 2 minutes after the ball starts rattling and regularly during use. Lower temperatures and high humidity will slow the drying and affect the gloss level. Avoid spraying when air or surface temperature is below 10°C or above 30°C.
During Spraying: Hold the can upright 10 to 25cm from the surface. To ensure surface compatibility, test spray on inconspicuous area. Spray with smooth even strokes, parallel to the surface. Apply several light mist coats rather than one heavy coat, which can cause runs and sags.
After Spraying: Prevent blocking by turning the can upside down and spraying until clear gas emerges. Also wipe front of nozzle clean. Clean up overspray while it is still wet with mineral turpentine.

How to dispose responsibly
Unused paint
DISPOSAL Spray unwanted paint onto newspaper, allow to dry and dispose of via domestic waste collection. Empty aerosol cans are recyclable via steel can recycling programs. Disposal of empty aerosol containers via domestic recycling programs may differ between local authorities. Check with your local council first.

Recently viewed products