Key Points
- Durable protective finish
- Available in 300g
- Available in four colours: Blue, Bronze, Charcoal and Silver
- Suits wide range of metal surfaces

Dulux Metalshield Hammered Finish is a durable, protective finish that can be applied to a wide range of metal and pre-painted surfaces including steel, wrought iron, galvanised iron, Zincalume, stainless steel, aluminium, brass, copper and timber. The hammered-effect finish is ideal for hiding surface imperfections such as scratches and weld joints. Use it on machinery, trailers, fences, railings, gates, windows, downpipes, doors and furniture. Available in four colours: Blue, Bronze, Charcoal and Silver
Aged/Lightly rusted metal surfaces:
Remove any rust by scraping, sanding or wire brushing. Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt.
New Bare Steel and Wrought Iron
Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt.
Galvanised Iron, Zincalume
Clean surface with Selleys® Sugar Soap and a Scotch-Brite® Pad to remove any grease, oils and dirt. Rinse with clean water.
Aluminium, Copper, Brass, Stainless Steel
Clean surface with Selleys Sugar Soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water
APPLICATION
Before Spraying: Shake can well for at least 2 minutes after the ball starts rattling and regularly during use. Lower temperatures and high humidity will slow the drying and affect the gloss level. Avoid spraying when air or surface temperature is below 10°C or above 30°C.
During Spraying: Hold the can upright 10 to 25cm from the surface. To ensure surface compatibility, test spray on inconspicuous area. Spray with smooth even strokes, parallel to the surface. Apply several light mist coats rather than one heavy coat, which can cause runs and sags.
After Spraying: Prevent blocking by turning the can upside down and spraying until clear gas emerges. Also wipe front of nozzle clean. Clean up overspray while it is still wet with mineral turpentine.