Previously known as DULUX METALSHIELD QD Enamel TopcoatDULUX METALSHIELD® QD Enamel is designed to provide a durable exterior high gloss finish typically for use in equipment and machinery manufacture and refurbishment. Drying times provide good wet edge control with excellent "melt in" and minimal dry spray.
Cleaning materials
Clean up thinnerClean all equipment with DULUX Duthin 340 Spray Thinner - Other
Application Tools
Air Spray, Airless Spray, Brush, Roller
Do not apply at temperatures below 10°C. Do not apply at relative humidity above 85% or when the surface is less than 3°C above the dewpoint. Do not overcoat outside the minimum overcoat interval or wrinkling may occur. Recoat intervals will be longer under cold conditions. If in doubt, test a small inconspicuous area first.
