Dulux Metalshield® RFU Etch Primer is a high performance primer providing superior adhesion and outstanding protection to a wide range of metal surfaces. Its ready-for-use formulation is perfect for brush application and ideal where rapid topcoating is required.
Touch Dry
15 minutes
Re-coat
15 minutes
Cleaning materials
Acetone or Dulux Urethane Thinner
Application Tools
Brush, Roller, Spray
Ensure the surface has thoroughly dried prior to application. Do not apply on top of existing painted surfaces. Commercial applications may require additional surface preparation. Aged/lightly rusted surfaces: Remove any rust by scraping, sanding or wire brushing. Wipe surface with acetone to remove any residual grease, oils and dirt. Bare steel and wrought iron: Wipe surface with acetone to remove any residual grease, oils and dirt. Galvanised iron, ZINCALUME®, aluminium, copper, brass and stainless steel: Clean surface with Selleys® Sugar Soap and a Scotch-Brite® Pad to remove any grease, oils and dirt. Rinse with clean water.
Stir contents thoroughly with a broad flat stirrer using a stirring, lifting action. No thinning is required for brush or roller application. For spraying thin up to 150ml per litre with acetone or Dulux Urethane Thinner. Stir well prior to applying one coat of Dulux Metalshield® RFU Etch Primer by brush, roller or spray. For best results, apply the primer immediately after the surface preparation is complete. Application and drying temperatures must be above 10°C.
