Acratex® Acraglaze Water Based is a clear gloss finish for application over Acratex® and Coventry® Quartz Coat (mineral trowel finish) and Sienna™ Coarse to seal and enhance system performance.
Re-coat
2 hours
Cleaning materials
Water
Application Tools
Air Spray, Airless Spray, Brush, Roller
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and Acratex® Substrate Guide.
Brush,Roller or airless spray.
Do not apply Dulux Acratex Acraglaze in temperatures of high humidity or below 10C.
Product should be thoroughly mixed before use. Dulux Acratex Acraglaze Water Based is applied in a similar manner to normal paints using roller or airless spray. A 10-20mm nap roller is used depending on the type of texture to be overcoated.
Typical airless spray set up: Graco Ultra 500,695 or 795 using 0.011-0.013 spray tip at approx. 1000 psi.
Surface Preparation
Ensure the surface is clean,dry, and free of all contaminants.
Dulux Acratex Quartzcoat or Sienna finishes should be dry and of uniform colour and texture.
Areas lean in aggregate should be made flush to their surrounding surfaces.
Ensure adequate masking is used to protect adjacent surfaces.
