Acratex® Acrashield® Advance is a high build, elastomeric performance coating that forms a finishing barrier coat in the Acratex® Texture and anti-carbonation systems. Delivering a paint-like appearance, its film builds are three times thicker than that of standard decorative paint, providing enhanced crack bridging performance. Applied by conventional nap roller or airless spray. Available in matt, low gloss and gloss finishes.
Re-coat
2 hours
Cleaning materials
Water
Application Tools
Air Spray, Airless Spray, Brush, Roller
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and Acratex® Substrate Guide.
Brush, roller and airless spray
Brush and roll at the same time to avoid picture framing. Product should be thoroughly mixed before use. Refer to the Dulux Acratex Application Manual for detailed instructions.
Dulux Acratex AcraShield may be applied by brush, roller or airless spray. A 10-20mm nap roller is used depending on the type of texture being overcoated.
Typical Airless Spray set up is: Graco Ultra 500 using 0.019-0.021 spray tip at approx. 1000 psi.
