Dulux Professional® SteriGuard® is a range of premium specialty paint products designed to support internal environments in clinical settings. Such environments use strict cleaning programs in order to maintain a healthy and sterile state.
Dulux Professional® SteriGuard® Durable Acrylic Low Sheen is a premium, hard-wearing interior water-based product designed to withstand general cleaning cycles in clinical environments. The low VOC, low odour formula ensures quick return to service with less disruption. It contains Bio-Pruf™ Technology, which when combined with clinical cleaning programs, helps assist in the protection against mould and mildew growth to keep surfaces clean and help maintain good indoor air quality.
Dulux Professional® SteriGuard® Water Based Enamel is a premium, hard wearing interior/exterior water-based enamel designed to withstand cleaning cycles in clinical environments. The low odour formula ensures quick return to service with less disruption. Dulux Professional® SteriGuard® Water Based Enamel contains Bio-Pruf™ Technology, therefore assisting in the protection against mould and mildew growth to keep surfaces clean and help maintain good indoor air quality.
Dulux Professional® SteriGuard® Ultra is a two-part durable polyurethane that when mixed, uses Bayhydrol® water-based technology from Covestro to produce an ultra-tough interior finish designed to withstand high intensity cleaning cycles in clinical environments. The low VOC, low odour formula ensures quick return to service with less disruption. It contains Bio-Pruf™ Technology, allowing it to withstand clinical cleaning cycles, therefore assisting in the protection against mould and mildew growth, helping to keep surfaces clean and help maintain good interior air quality.
SteriGuard® safety
Warning: When spraying SteriGuard®, please ensure that the appropriate Personal Protective Equipment (PPE) is worn at all times.
For further product or application advice or a Safety Data Sheet contact Dulux Help & Advice Australia on 13 23 77 or New Zealand on 0800 800 424.
Surface preparation
Dulux Professional® SteriGuard Water Based Enamel can be used in combination with any Dulux undercoat, but Dulux Professional® Total Prep® is recommended.
Application
Dulux Professional® SteriGuard® Durable Acrylic Water Based Enamels can be applied by brush, roller or spray.
Spreading rate = approximately 16m² per litre.
Drying time
Approximately two hours depending on the product.
Wash up
Water.
SteriGuard® safety
Warning: When spraying SteriGuard®, please ensure that the appropriate Personal Protective Equipment (PPE) is worn at all times.
For further product or application advice or a Safety Data Sheet contact Dulux Help & Advice Australia on 13 23 77 or New Zealand on 0800 800 424.
Preparation
Dulux Professional® SteriGuard® Ultra can be used in combination with any undercoat, but Dulux Professional® Total Prep® is recommended.
Application
Dulux Professional® SteriGuard® Ultra is a two-pack product where PART A must be mixed with PART B.
Apply using a brush or synthetic roller (clear – short nap length, white – medium nap length).
The spreading rate of Dulux Professional® SteriGuard® Ultra is approximately 16m² per litre.
Wash up
Water
SteriGuard® safety
Warning: When spraying SteriGuard®, please ensure that the appropriate Personal Protective Equipment (PPE) is worn at all times.
For further product or application advice or a Safety Data Sheet contact Dulux Help & Advice Australia on 13 23 77 or New Zealand on 0800 800 424.
Surface preparation
New surface
Ensure all surfaces are clean and dry prior to application. Brush down to remove dust.
Previously painted surfaces
Surfaces must be sanded to remove loose, peeling, flaking or chalky paint. Sand all gloss and semi gloss surfaces to a dull finish and wipe down witha damp cloth to remove surface dust. Apply one coat of Dulux Professional® Acrylic Sealer Undercoat or Dulux Professional® Total Prep® Acrylic to any areas that have been repaired. Previously painted surfaces must be sanded to remove loose, peeling, flaking or chalky paint. Sand all gloss and semi gloss surfaces to a dull finish and wipe down with a damp cloth to remove surface dust. Apply one coat of Dulux Professional® Acrylic Sealer Undercoat or Dulux Professional® Total Prep® Acrylic to any areas that have been repaired.
Bare paper-faced wallboard, cement sheet and brick
Brush down to remove any surface dust. Apply one coat of Dulux Professional® Total Prep® Acrylic or Dulux Professional® Water Based Acrylic Sealer Undercoat.
Bare interior timber
Sand smooth. Dust off. Apply one coat of Dulux Professional® Total Prep® Acrylic.
Bare set plaster, fibrous plaster and plaster-glass
Brush down to remove any surface dust. Apply one coat of Dulux Professional® Oil Based Primer Sealer Undercoat. For best results on bare set plaster and powdery surfaces apply one coat of an appropriate sealer binder.
Application
Wash up
Stir well before use. Apply two coats of Dulux Professional® SteriGuard® Durable Acrylic.
Warning: When spraying, please ensure that the appropriate Personal Protective Equipment (PPE) is worn at all times.
Water.
