Feast Watson
Weatherproof Varnish Satin
Feast Watson
Weatherproof Varnish Satin
About Feast Watson Weatherproof Varnish Satin
Feast Watson Weatherproof Varnish is a clear, polyurethane timber finish that provides excellent timber protection against the elements. Incorporating UV screening, Weatherproof Varnish provides a tough clear finish that is resistant to sunlight, salt water, chemicals, oils and solvents. Available in satin and gloss. Weatherproof Varnish can be applied to exterior and interior timber window frames, doors, trims, panelling, boat handrails and furniture. Weatherproof Varnish can also be used to give Feast Watson Wood Shield oil a gloss or satin finish. Note Weatherproof Varnish is not suitable for heavy wear surfaces (such as decks and walkways). For these areas use Feast Watson Decking Oil or Feast Watson Decking Stain.
Key Points
- Clear timber finish
- UV screening
- Highlights timber beauty
- Resistant to sunlight, salt water, chemicals, oils and solvents
- Weather resistant
Quick guide
Touch Dry
4 hours
Application Tools
Spray, Brush, Roller
Product specification
Precautions and limitations
Drying times are given at 25ºC and 50% relative humidity. Lower temperatures or higher humidity can lead to extended drying times.
Do not apply in temperatures under 10ºC or above 35ºC or when rain or heavy dew is expected within the coating dry time.
Weatherproof Varnish is not suitable for heavy wear surfaces such as decks and walkways. For these areas use Feast Watson Decking Oil, Traditional Timber Oil or Timber & Deck Stain.
Weatherproof Varnish is also not recommended for exterior broadwall areas such as cladding and weatherboards.
Performance guide
- Weather: Exterior durable.
- Salt: Unaffected by slash or spillage.
- Heat Resistance: Up to 100C.
- Water: Excellent.
- Solvent: Suitable for dilute splash.
- Acid: Suitable for dilute splash.
- Alkali: Suitable for dilute splash.
Surface preparation
Previously painted surface
Weathered Timber
Prepare exterior weathered or grey timber by cleaning thoroughly with Woodclean as per the instructions. Sand to a smooth surface and remove all sanding dust before coating.
Previously Coated Timber
Previously coated surfaces need to be taken back to bare timber by sanding timber to a smooth surface. Remove all sanding dust before coating.
Unpainted surfaces
New Timber
Allow new timber to acclimatise in its final position for 4-6 weeks. Coat with Feast Watson Timber Primer to protect it from stains and warping during the acclimatisation period.
Prepare exterior timber for coating with Feast Watson Woodclean as per the instructions.
Sand to a smooth surface and remove all sanding dust before coating.
How to apply
Brush, Roller
Weatherproof Varnish should be stirred thoroughly before and during application with a flat blade stirrer taking care not to introduce bubbles. Apply Weatherproof Varnish using a brush, roller or spray. If spraying Weatherproof Varnish may be thinned by using 10% mineral turpentine. If applying by roller, use a short nap (5mm) mohair roller. Ensure edges and end grain are fully coated. Apply minimum three coats. Four or more coats may be applied for extra durability, or when the coating has been thinned. Allow 12 hours drying between coats. Sand lightly between coats. The final coat should be applied within 30 hours of the previous coat to ensure timber is protected.
Maintenance
Regularly monitor the surface for signs of colour loss or surface defects. When required, lightly sand the surface and remove dust. Re-coat with additional coats of Weatherproof Varnish as per application instructions.
