Important customer information: Update to Temporary fuel surcharge.
Find out more.
Hamburger Icon WhiteHamburger Icon
Dulux TradeDulux Trade
Login/Signup
Dulux Trade
  • About Dulux
    Dulux My Home
    Dulux Specifier
    Privacy Policy
    Terms & Conditions
    Careers
  • Customer service
    Contact Us
    Shipping & Returns
    Find a Store
    Sustainability
    Media
    Dulux Group Corporate
  • Dulux in the Community
    Surf Life Saving Club project
About Dulux
Dulux My Home
Dulux Specifier
Privacy Policy
Terms & Conditions
Careers
Customer Service
Contact Us
Find a Store
Sustainability
Dulux Group Corporate
  • © 2026 Dulux

  • Careers
  • Recommended Sites
  • Shipping & Returns
  • Terms & Conditions
  • Privacy Policy
  • Conditions of Sale
Build: 1.2.37 - Thu, 02 Jul 2026 03:42:07 GMT

Intergrain

UltraPrep Tannin & Oil Remover

SALE OFF

No image preview available

SALE OFF

Intergrain

UltraPrep Tannin & Oil Remover

Loader

About Intergrain UltraPrep Tannin & Oil Remover

Intergrain UltraPrep™ Tannin & Oil Remover is a powerful, high strength remover. Specially formulated to quickly draw out tannins and oils from the surface of exterior timber. The high strength formula also lifts old or worn existing timber finishes.<br><br>Note: Intergrain UltraPrep Tannin & Oil Remover is not a paint and varnish stripper, to remove sound coatings use a coatings stripper or sand off.

Downloads
Key Points
  • High strength
  • Draws out tannins and oils from the timber surface
  • Lifts old or worn existing timber finishes
Quick guide

Cleaning materials

Water

Application Tools

Other

Product specification
Precautions and limitations

Exterior use only. Not suitable for interior use.
Wear waterproof gloves and safety glasses.
Avoid contact with painted, glass, concrete or metal surfaces and vegetation. Protect areas not to be cleaned.
May be corrosive to metals. Rinse off thoroughly if contact occurs.
You must always use UltraPrep Timber Cleaner after UltraPrep Tannin & Oil Remover.

Surface preparation
Previously painted surface

Remove surface dirt by sweeping or washing down with water.

How to apply
Brush, Roller

Shake Intergrain UltraPrep Tannin & Oil Remover thoroughly.

Wet the timber surfaces to be cleaned with water.

Apply Intergrain UltraPrep Tannin & Oil Remover undiluted to the timber with a stiff bristle brush. Spot cleaning should be avoided to prevent patchy results.

Note: Product is very slippery, take care when walking on treated surface.

Leave Intergrain UltraPrep Tannin & Oil Remover on the timber for 10–15 minutes. If necessary, apply more product to keep timber damp throughout this period. Do not allow to dry on the surface.

Scrub the timber vigorously with a stiff broom. Do not use a wire brush.

Rinse off exterior surfaces thoroughly using maximum pressure from a garden hose or using a high pressure water cleaner. For best results, a high pressure water cleaner is recommended. Important: Failure to thoroughly remove Intergrain UltraPrep Tannin & Oil Remover may result in timber discolouration under clear finishes.

If removing worn coatings and stubborn areas remain, sand or repeat application as per the instructions above.

Clean timber with Intergrain UltraPrep Timber Cleaner closely following label instructions.

Note: After cleaning with Intergrain UltraPrep Tannin & Oil Remover, some timber species will appear darker. Intergrain UltraPrep Timber Cleaner will restore brightness.

Caution: Wear waterproof gloves and safety glasses. Avoid contact with painted, glass, concrete or metal surfaces and vegetation. Protect areas not to be treated. May be corrosive to metals. Rinse off thoroughly if contact occurs.

Recently viewed products