Intergrain Woodblend is a water based timber and grain filler, suitable for both interior and exterior use. Woodblend has excellent durability, minimal shrinkage and low odour. It is easy to apply and sands to an extremely fine, smooth finish. Woodblend is suitable for use on all timber species and can be coated with water or oil based paints, stains and timber finishes. Woodblend is available in a range of popular timber colours which can be mixed to achieve custom shades. Environmentally Responsible - Being water based, Woodblend emits significantly less VOC’s (volatile organic compounds) into the atmosphere than traditional oil based putties. So, combined with being healthier to use, Woodblend is much gentler on the environment.
Cleaning materials
Water
Application Tools
Putty Knife
Surface must be in sound condition, clean, dry and free from dust, grease, wax and oil. Indentations and holes must be clear of all loose material.
Apply Woodblend with a flexible filling blade or knife. Fill deep holes in approx. 10mm stages, allowing 2 hours drying time between each stage. To ease application, dampen blade with water. Wipe off excess with a slightly damp sponge. When dry, sand to a smooth finish. When using clear finishes, apply Woodblend after the first coat of clear to minimise smudging. For use as a grain filler, thin Woodblend with 5-10% water to achieve required consistency. Apply with a flexible filling blade or knife and allow to dry. When dry, sand back to bare timber, leaving filler only in the grain.
Important Keep container tightly closed when not in use.
